The main structural features and advanced technology used in the HY-388F(4TX) backhoe loader
| Overall Dimension | |||
| 1 | Length(with bucket on ground) | 6450±80mm | |
| 2 | Overall width（ at stabilizer ） | 2650±20mm | |
| 3 | Load Bucket width | 2620mm | |
| 4 | Height(To the top of the cab) | 3120±10mm | |
| 5 | Height(To the top of the digging pole) | 3940 ±20mm | |
| 6 | Wheel base | 2335±10 mm | |
| 7 | Back wheel Tread | 2139 ±10mm | |
| Main Loading Technical Specification | |||
| 1 | Rated load | 2500KG | |
| 2 | Operating weight | 10400kg | |
| 3 | Rated bucket capacity | 1.2m³ | |
| 4 | Max. dump clearance | 3050±50 mm | |
| 5 | Dump reach | 870±20 mm | |
| 6 | Outside of bucket | 5750±50mm | |
| Main Digging Technical Specification | |||
| 1 | Rated digging bucket capacity | 0.3m³ | |
| 2 | Max. digging depth | 3820±20 mm | |
| 3 | Max. digging radius | 5345±20mm | |
| 4 | Max. dumping height | 3740±20mm | |
| 5 | Max. digging force | kgf | |
| 6 | Max. Digging Height | 5470 ±20mm | |||
| 7 | Lifting force at maximum digging radius | 1220kg | |||
| 8 | Maximum digging depth (telescopic arm) | 4970±20 mm | |||
| 9 | Maximum loading height (telescopic arm) | 4983±20mm | |||
| 10 | Maximum digging height (telescopic arm) | 6680±20mm | |||
| Diesel engine | |||||
| 1 | Model | YC4A105Z-T20 | |||
| 2 | Type | water-cooling | |||
| 3 | Rated output | 75 (kW) | |||
| 4 | Total exhaust of cylinder | 4.8(L) | |||
| 5 | Rated speed | 2200(r/ min) | |||
| 6 | Max. Torque | 400(N.M) | |||
| Transmission System | |||||
| 1 | Torque Converter | Model | 315 | ||
| Cooling type | Pressure oil circulating | ||||
| 2 | Transmission case | Model | 15 | ||
| Type | Synchromesh mechanical shift | ||||
| 3 | Axle and Tire | Model | WZL100 | ||
| 4 | Gear shift position | 4 F 、 4 R | |||
| 5 | （F/ R） km/h | F1 ，5km/h ；F2 ，10km/h； F3 ，18km/h ；F 4 ，32km/h； R1 ，5km/h ；R2 ，10km/h； R3 ，18km/h ；R4 ，32km/h； |
|||
| 6 | Size of tire | 16.9-28 | |||
| The hydraulic system | |||||
| 1 | Working pump discharge | 63ml/r | |||
| 2 | Working pump pressure | 20Mpa | |||
| 3 | Type of steering gear | BZZ-500 | |||
| Excavating equipment ( crushing hammer) | |||||
| 1 | Drill rod diameter mm | 68-70 | |||
| 2 | Pressure of work Mpa | 11-14 | |||
| 3 | The impact frequency | 500-900 | |||
| 4 | Flow range L/ min | 25-45 | |||
| 5 | The kinetic energy KN | 49 | |||
| Oil Capacity | |||||
| 1 | The hydraulic oil tank | 125 | |||
| 2 | Diesel fuel tank | 125 | |||
